Strong pressure type belt filter press model: LDDY5
High pressure dehydration belt pressure filter belt press: 5 groups
Types of material handling equipment: Widely suitable for dehydration and drying production of plant residues (or grains) remaining after processing and use of plant roots, stems, leaves and fruits, including lees residue, beer residue, cassava residue, sweet potato residue, corn residue , Bagasse, Chinese medicine residue, apple residue, pear residue, pineapple residue, tea residue, wood pulp fiber, pulp fiber, horseshoe residue, soybean residue, potato residue, coffee residue and other tanks, residue and pulp materials Dehydration of water by mechanical filter press.
Dimensions: 5500 × 2380 × 2150 (m)
Processing capacity: 12-24m3 / h
Feed moisture content: 95 (%)
Discharge moisture content: 35-51 (%)
Filter belt width (MM)
Capacity (M3 / HR)
6 ~ 11
8 ~ 16
12 ~ 23
16 ~ 28
19 ~ 33
22 ~ 41
Model weight (KG)
>>> Principle of pressure belt filter
1. The refined wet slag raw material (or solid mixture) in the cloth area is leveled by a unique rotating mechanism so that the slag is evenly distributed on the lower screen. At the same time, free water between most of the fibers is excluded. 2. The main components of the pre-pressing zone: Three uniformly distributed slags from the wedge-shaped zone and the arc-shaped roller enter the arc-shaped wedge-shaped zone in the downward bend for initial pressure dehydration. The rollers set on the three parabolic lines further slowly apply gentle pressure A part of the interstitial water is squeezed out.
3. The main components of the low-pressure drainage area: The porous drainage rollers are composed of extra-large diameter drainage rollers with evenly distributed 6048 drainage holes. The large-area low-pressure drainage area has a unique drainage structure that can quickly drain the squeezed water and drain the extra-large diameter. The rollers ensure that the pressing force is increased gently.
4, 5, 6, and the upper and lower filter belts in the squeezing zone in the high-pressure zone I to III bypass three sets of counter pressure rollers with decreasing diameter, so that a large amount of water is slowly and strongly squeezed out to form a filter cake. At the same time, the "S" -shaped winding of the filter belt generates increasing surface shear force. The pressure on the slurry between the filter belts gradually increases, and a small amount of water is continuously discharged, which gradually reduces the slurry moisture.
Customers are welcome to bring samples of materials to our factory to visit and test to test the dehydration effect of our equipment. (We can also ship or express samples to our factory, and the cost is borne by our company. This will ensure that the material samples can arrive in time and accurately. Our technicians An accurate and true data report will be detected for your reference), Luding Environmental Protection looks forward to your arrival. Belt filter press manufacturer consultation phone 400-6633-126