网上棋牌游戏

Product center

LDBZ Model Standard Sludge Dewatering Machine

Ordinary belt sludge dewatering machine

Feeding device: designed according to customer needs

Material processing equipment types: sand washing tailings, sand processing tailings, sand making sludge, river sand sludge, building sand making sludge, sand washing sludge, sand washing processing tailing sludge, iron ore sludge, pickling Iron and steel tailing sludge, ceramic factory sludge, ceramic sludge, bauxite tailing sludge, piling sludge, river sludge, quartz sand sludge, quartz sand gravel, tailing iron tailing, ceramic, marble polishing Dewatering by mud filter press.

Processing capacity: 12-24m3 / h

Feed moisture content: 95 (%)

Discharge moisture content: 45-51 (%)

LDBZ型号标准污泥脱水机 1

Technical Parameters

model

LDBZ-1000

LDBZ-1500

LDBZ-2000

LDBZ-2500

LDBZ-3000

LDBZ-3500

Power (KW)

Host

2.2

3

4

5.5

7.5

7.5

Complete

11

13

17

19

twenty two

25

Filter belt width (MM)

1000

1500

2000

2500

3000

3500

Capacity (M3 / HR)

6 ~ 11

8 ~ 16

12 ~ 23

16 ~ 28

19 ~ 33

22 ~ 41

Dimensions

Length (MM)

5200

5400

5500

5600

5600

5650

Width (MM)

1650

1900

2380

2900

3400

3900

High (MM)

1950

2100

2150

2200

2300

2350

Model weight (KG)

3200

4200

6500

7500

9000

10000

>>> Principle of ordinary belt sludge dewatering machine

1. The refined wet slag raw material (or solid mixture) in the cloth area is leveled by a unique rotating mechanism so that the slag is evenly distributed on the lower screen. At the same time, free water between most of the fibers is excluded. 2. The main components of the pre-pressing zone: Three uniformly distributed slags from the wedge-shaped zone and the arc-shaped roller enter the arc-shaped wedge-shaped zone in the downward bend for initial pressure dehydration. The rollers set on the three parabolic lines further slowly apply gentle pressure A part of the interstitial water is squeezed out.

3. The main components of the low-pressure drainage area: The porous drainage rollers are composed of extra-large diameter drainage rollers with evenly distributed 6048 drainage holes. The large-area low-pressure drainage area has a unique drainage structure that can quickly drain the squeezed water and drain the extra-large diameter. The rollers ensure that the pressing force is increased gently.

4, 5, 6, and the upper and lower filter belts in the squeezing zone in the high-pressure zone I to III bypass three sets of counter pressure rollers with decreasing diameter, so that a large amount of water is slowly and strongly squeezed out to form a filter cake. At the same time, the "S" -shaped winding of the filter belt generates increasing surface shear force. The pressure on the slurry between the filter belts gradually increases, and a small amount of water is continuously discharged, which gradually reduces the slurry moisture.

LDBZ型号标准污泥脱水机 2

Product main features:
1. Frame: National standard high-quality square steel is used, and the paint is a special anti-corrosion paint customized for the company. It adopts today's advanced thermal spray treatment, which has high strength and strong corrosion resistance.
2. Screen rollers and bolts are made of high quality stainless steel.
3. The rubber roller is processed into a rubber roller blank using a seamless steel pipe, and then processed into a fully sealed rubber roller by using high-quality synthetic rubber that is resistant to acid and alkali and wear. After vulcanization, the rubber roller is strengthened again, and its technical indicators such as wear resistance, strength and elasticity are better than similar products.
4. The bearing seat is made of completely sealed cast steel, which is strong and durable. The bearing is a high-strength double-row cylindrical bearing, and its bearing capacity is more than 2.7 times greater than that of ball bearings selected by other manufacturers.
5. The sink and cleaning box are made of high-quality PVC sheet, which is corrosion-resistant, durable, and never rusty.
6. The filter belt adopts German technology and a high-quality filter belt from a Sino-German joint venture. The material of the filter belt, the thickness of the warp and weft, and the weaving method are customized according to the different materials. Excellent dewatering rate and durable.
7. The transmission device purchases a domestic high-quality brand combined mechanical stepless speed change mechanism.

LDBZ型号标准污泥脱水机 3